Product details of LOCTITE® 680 RETAINING COMPOUND 50ml
LOCTITE® 680™ provides the following product characteristics:
||Positive under UV lightLMS
||One component - requires no mixing
LOCTITE® 680™ is designed for the bonding of cylindrical fitting parts, particularly where low viscosity is required. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. LOCTITE® 680™ provides robust curing performance. It not only works on active metals (e.g. mild steel) but also on passive substrates such as stainless steel and plated surfaces. The product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
This Technical Data Sheet is valid for LOCTITE® 680™ manufactured from the dates outlined in the "Manufacturing Date Reference" section.
Certified to ANSI/NSF Standard 61 for use in commercial and residential potable water systems not exceeding 82° C. Note:This is a regional approval. Please contact your local Technical Service Center for more information and clarification.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.1
Viscosity, Brookfield - RVT, 25 °C, mPa·s (cP):
Spindle 3, speed 20 rpm, 750 to 1,750LMS
Viscosity, Cone & Plate, 25 °C, mPa·s (cP):
Shear rate 129 s -1 650 to 1,850
Flash Point - See MSDS